Perfect solution for cars that don’t have room for both a floor jack and a jack stand such as my 2014 RS7

Works great. Be careful not to tighten down to much. I got this one instead of the universal version due to the shape of the master cylinder under the reservoir.

Picked this up to carry in my lifted Jeep. Overall weight rating is less than I'd prefer, but its only lifting one corner of the vehicle at a time, so it works. Using an impact driver makes this thing super fast, and the back up wrench is there if you forget your impact or its dead. Have used it twice so far and am very happy with it.

Overall good product. Had to fab a bit for my install location. I do wish the straps we slightly longer.

Easy mount to my Prinsu Roof Rack. Jack and stand have aligned holes for padlock or cable lock. I chose to use a different type of cam strap. Jack is held firm.

Really good for my 2003 bmw e53

I was a little worried that the Jack Rod would not work with my Sears 4-ton floor jack because it has a square upper rod on the jack pad. When I put the Jack Rod in place it fit perfectly!
l tried to reach out to the Tibetan Monks to compliment them on the superior quality of their workmanship, but they were shy and indicated they were still waiting for their 2025 W-2 forms.

There's people out there that will tell you that you can buy a RV JACK for less than half of the cost. Let me tell you that you probably can but they're not designed to perform what this AGM scissor jack can. This AGM-product is specifically designed to lift your machine safely and efficiently so you can work in it. I'm so glad I finally pulled the trigger on getting one.

Great product works flawlessly! Very stable raised sxs with ease!

This is a quality mount. However, like many others I couldn’t get the strap to tighten properly. I chose to modify the design by drilling holes in the studs that are on the mount and pinning it rather than strapping it.

I haven't had to used the jack on my car yet. Now that I want to use it nothing has broke. But, I have used it on a buddy's car. He has a xxxxxx car and has a Chinese knock off of this jack. His Broke. Just like his car does every trip. He even scratched his head and admitted the superior nature of the AGM Jack. I also have the new plug kit. Haven't had to use that yet either but I am a pack rat and like that kinda stuff. As always, I am happy with AGM products.

Mounts perfectly between the seats and the sand pad comes off easily so I throw that in my boxes with the impact.

Great product. Easy to use and mount.

I purchased 4 of the XL3.5 ton JackRods for my 4 teo ton jacks so I can lift my C8 Z06 completely off the ground 24" (O.cam.also.just ise one at a time or im pairs to lift one end or one side of the car. I also bought two of the 2 ton Jackrods for my lightweight 1.5 ton floor jacks, and two of the 5 ton JackRods for simple things like changing tires and checking brakes.

Why are these perfect... on late model Vettes you need to use a jack-puck in the frame in order not to damage the rocker panels but this is the same point you need to place a jack stand... impossible to occupy the same spot at the same time with a jack and jack-stand. The JackRods turn my floor jacks into jack stands... problem solved!!

Additionally it allows me flexibility and light weight options if needed transport. I highly considered getting Quickjacks and they have some great benefits but come with many drawbacks. They are very heavy and not easy to properly place, block access from the sides of the car, take up floor or wall space, have many potential issues with hydrolocs, and more difficult to transport to a track (takes too much space in the trailer and they don't fit in a trunk for that day trip)

I highly recommend these even though I feel they might be a little expensive but well worth it and why I have a total of eight of them for different uses.

The picture is of my 2025 C8 Z06 while doing engine oil/filter change and DCT filter change.

Everything works great.

Worked perfectly

This is the second set of coilovers I have used the AGM sliders on and really like how they quiet them down and allow the springs to twist freely.

I use this on my Baja bug and love it. It works in the sand, plus it raises and lowers quickly. Also props to AGM for including the drill adapter, wrench and 4 in 1 jack pad.

Put it in a place where it can't be stolen easily.

Not a scratch on the boxes that were shipped. Everything was packed perfectly. The jack worked very well, I mounted it to the roll bar of my RZR XP 1000. I was a little leery of the snowboard bindings type of mounting straps but to my surprise that work rather well. This jack is made very well. I would definitely recommend to anyone looking for a jack for their side by side with a very good mounting system.

The mount is nice and burly, heavy weight but the strap is just too darn thin. My hooks were thinner than I expected and the buckle is so wonky.

Product fit perfectly on my new SPEED car.
Holds the manual jack just the way it should
No rattles or shaking while on the trail!
Definitely worth the $$

awesome product. lifts my utv easily

Just used it the first time to replace all the fluid and damn this made the job easier! Replaced all the fluid and no air in the system, even got rid of the spongy GM brake peddle!
I used an inline pressure regulator for added safety and usability.
My only complaint is the 60mL syringe came cracked down the side but I had a smaller on on hand to draw out he excess fluid from the reservoir.

I recently purchased the manual jack for 400 bucks at the sand show and must say I’m so happy with this purchase. I used it to break my beads on my tires to install some 35’s on my can am x3 and used it to lift up my can am for the install.. the whole process was quick n easy and I should’ve purchased one a long time ago. I couldn’t be happier with my Agm jack and it looks cool mounted to my can am in the rear as seen in the pic.SHOUT OUT TO AGM!! Fantastic product!!👍👍