Weld-On Jack Point (with 10 degrees Misalignment) - AGMProducts
Weld-On Jack Point (with 10 degrees Misalignment) - AGMProducts
Weld on Jack Point welded onto a front control arm
AGM Electric Jack introduction video

Punto de conexión soldado (con 10 grados de desalineación)

$72.00 $68.40 AHORRA 5%
SKU: AGM-EJA-2031
Disponibilidad: En stock Preorden Agotado

Contar: paquete de 4

paquete de 4
1 paquete

Comprado frecuentemente junto

Precio total:$1,320.98 $1,317.38
Description

Los soportes Jack Point pequeños y de bajo perfil se sueldan a su suspensión o chasis y proporcionan una conexión mecánica entre el gato y el vehículo. Asegurando que su automóvil nunca se caiga del gato.

NOTA: El Jack Point para soldar se vende como unidades individuales.

F.A.Q.
THE JACK POINT IS FLAT, BUT MY SUSPENSION ARM IS CURVED, HOW TO I MAKE IT FIT BEFORE WELDING?
Each Weld-on Jack Point includes extra material on the backside so you can contour it to fit your chassis or suspension. To measure how much material you can remove:

Place the Weld-on Jack Point into your jack.

Mark with a Sharpie the material that sticks out beyond the face of the jack - Leave an additional .125–.250" of space past your sharpie mark for the weld bead.

This area .125"-.250" past your sharpie mark is the area on the backside of the Jack Point that you can sand and shape to fit the contour of your suspension or chassis components to ensure a tight fit before welding.

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
100%
(1)
0%
(0)
0%
(0)
D
David S.
Model Specific

I have no issues with the product. I understand it’s universal. I think it’d be good to offer model specific versions that mate better to the sxs control arms. The flat version leaves a major gap to fill in on the front control arms of my rzr turbo r in order to get it level and plumb.

David, thank you for the feedback and our apologies as it sounds like we did not make you aware that there is extra material on the backside of the Weld-on Jack points. That extra material is there so that you (or your fabricator) can better contour the back of the Weld-on Jack point to the shape of the suspension or chassis componets it is being welded to. We will update the verbage on the website to better reflect this. If you have any other questions we are happy to jump on a call or you can email us. 760-884-8319 or sales@agm-products.com.